>

Hyundai Equus: Presure Switch Specifications - Automatic Transmission Control System - Automatic Transmission System (SBC) - Hyundai Equus VI 2009-2025 Service ManualHyundai Equus: Presure Switch Specifications

Specifications

Specifications (20°C(68°F))
OFF => ON
146 ± 40 kPa
ON => OFF
50 kPa

    Presure Switch Description and Operation
    Description The oil pressure switch detects any abnormal hydraulic pressure to the 35R clutch in the N range. ...

    Presure Switch Schematic Diagrams
    Circuit Diagram ...

    See also:

    Smart Key Repair procedures
    Smart Key Battery Inspection 1. Check that the red light flickers when the door lock or unlock button is pressed on the transmitter. 2. Remove the battery (A) and check voltage if the red lig ...

    Exhaust pipe and muffler
    Visually inspect the exhaust pipes, muffler and hangers for cracks, deterioration, or damage. Start the engine and listen carefully for any exhaust gas leakage. Tighten connections or replace part ...

    Tire chains
    Tire chains, if necessary, should be installed on the drive wheels (rear wheels). Be sure that the chains are installed in accordance with the manufacturer's instructions. To minimize tire and c ...

    Categories

    Hyundai Equus Manuals

    © 2011-2025 Copyright www.heqmanual.com