>

Hyundai Equus: Output Speed Sensor Repair procedures - Automatic Transmission Control System - Automatic Transmission System (SBC) - Hyundai Equus VI 2009-2026 Service ManualHyundai Equus: Output Speed Sensor Repair procedures

Inspection
1.
Check signal waveform of output speed sensor using the GDS.

Specification: Refer to "Signal Wave Form" section.

    Output Speed Sensor Schematic Diagrams
    Circuit Diagram ...

    Input Speed Sensor Description and Operation
    Description Input speed sensor is a vital unit that measures the rate of rotation of the input shaft inside the transmission and delivers the readings to the TCM. The sensor provides critical ...

    See also:

    CVVT (Continuously Variable Valve Timing) System Description and Operation
    Description Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calculated by ...

    Front Wiper Motor Repair procedures
    Removal 1. Remove the windshield wiper arm (A) and blade after removing a nut. Tightening torque : 27 ~ 31 N.m (2.8 ~ 3.2 kgf.m, 20 ~ 23 lb-ft) 2. If necessary of removing the wiper blad ...

    Vehicle weight
    This section will guide you in the proper loading of your vehicle, to keep your loaded vehicle weight within its design rating capability. Properly loading your vehicle will provide maximum return ...

    Categories

    Hyundai Equus Manuals

    © 2011-2026 Copyright www.heqmanual.com