>
Hyundai Equus Manuals

Hyundai Equus: ETC (Electronic Throttle Control) System Specifications - Engine Control System - Engine Control/Fuel System - Hyundai Equus VI 2009-2026 Service ManualHyundai Equus: ETC (Electronic Throttle Control) System Specifications

Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Engine Control/Fuel System / Engine Control System / ETC (Electronic Throttle Control) System Specifications

Specification
[Throttle Position Sensor (TPS)]
Throttle angle(°)
Output Voltage (V)
TPS1
TPS2
0
0.5
4.5
10
0.96
4.05
20
1.41
3.59
30
1.87
3.14
40
2.32
2.68
50
2.78
2.23
60
3.23
1.77
70
3.69
1.32
80
4.14
0.86
90
4.6
0.41
98
4.65
0.35
C.T (0)
0.5
4.5
W.O.T (86)
4.41
0.59

[ETC Motor]
Item
Specification
Coil Resistance (x)
1.2 ~1.8 [20°C(68°F)]

    ETC (Electronic Throttle Control) System Troubleshooting
    Fail-safe mode ITEMSFAIL-SAFEETC MotorThrottle valve stuck at 5°TPSTPS 1 faultReplace it with TPS2TPS 2 faultReplace it with TPS1TPS 1,2 faultThrottle valve stuck at 5°APSAPS 1 faultReplace it ...

    ETC (Electronic Throttle Control) System Schematic Diagrams
    Circuit Diagram ...

    See also:

    If the engine stalls at a crossroad or crossing
    If the engine stalls at a crossroad or crossing, set the shift lever in the N (Neutral) position and then push the vehicle to a safe place. ...

    ETC (Electronic Throttle Control) System Repair procedures
    Inspection Throttle Position Sensor (TPS) 1. Connect the GDS on the Data Link Connector (DLC). 2. Start the engine and measure the output voltage of TPS 1 and 2 at C.T. and W.O.T. Throttle ...

    27 Brake Control Solenoid Valve Repair procedures
    Inspection 1. Turn ignition switch OFF. 2. Disconnect the E Module connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the res ...

    Categories

    Hyundai Equus Manuals

    © 2011-2026 Copyright www.heqmanual.com