>
Fail-safe mode |
ITEMS | FAIL-SAFE | |
ETC Motor | Throttle valve stuck at 5° | |
TPS | TPS 1 fault | Replace it with TPS2 |
TPS 2 fault | Replace it with TPS1 | |
TPS 1,2 fault | Throttle valve stuck at 5° | |
APS | APS 1 fault | Replace it with APS2 |
APS 2 fault | Replace it with APS1 | |
APS 1,2 fault | Throttle valve stuck at 5° |
When throttle value is stuck at 5°, engine speed is limited
at below 1,500rpm and vehicle speed at maximum 40 ~ 50 km/h (25 ~
31mph). |
Repair procedures
Air Injection Procedure
•
When injecting air into the air suspension system, always
raise the vehicle off the ground using a lift to prevent potential
damage to the ai ...
Engine Control Module (ECM) Repair procedures
Removal
When replacing the ECM, the vehicle equipped with the immobilizer must be performed procedure as below.
[In the case of installing used ECM]
1) Perform "ECM Neutra ...
AVN Antenna Components and Components Location
Components
...