Hyundai Equus: Fuel Filler Cap Description and Operation
Second generation VI (2009–2025) / Hyundai Equus VI 2009-2025 Service Manual / Emission Control System / Evaporative Emission Control System / Fuel Filler Cap Description and Operation
Second generation VI (2009–2025) / Hyundai Equus VI 2009-2025 Service Manual / Emission Control System / Evaporative Emission Control System / Fuel Filler Cap Description and Operation
| Description |
A ratchet tightening device on the threaded fuel filler cap
reduces the chances of incorrect installation, which would seal the fuel
filler. After the gasket on the fuel filler cap and the filler neck
flange contact each other, the ratchet produces a loud clicking noise
indicating the seal has been set.
Canister Repair procedures
Removal
1.
Turn the ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the service cover (A).
3.
Disconnect the fuel tank pressure sensor connector (A) and the ...
Fuel Tank Air Filter Repair procedures
Replacement
1.
Turn the ignition switch OFF and disconnect the negative (-) battery cable.
2.
Remove the service cover (A).
3.
Disconnect the canister close valve connector (A).
4.
Di ...
See also:
Height Sensor Repair procedures
Removal
[Front Height Sensor]
•
Avoid suffering excessive impact.
•
Do not entering the water into pin inside.
•
Take care not to be damaged height senso ...
Fuel Sender Assembly Repair procedures
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
"Release the residual pressure in fuel line.
(Refer to Fuel Delivery System -""Release Residual Pres ...
Fuel Pump Control Module (FPCM) Description and Operation
Description
The fuel pump control module (FPCM) is installed on the right
side of the trunk compartment. It controls the BLDC (Brushless DC)
motor mounted inside the variable low pressure fuel ...
Categories
Hyundai Equus Manuals
© 2011-2025 Copyright www.heqmanual.com