Hyundai Equus: Muffler Components and Components Location

Exhaust Manifold Repair procedures

Removal and Installation 1. Disconnect the negative terminal (A) from the battery. Tightening torque : 3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft) 2. Remove the engine room cover (A ...

Muffler Repair procedures

Removal 1. Disconnect the rear oxygen sensor (HO2S) connector (A) on LH and RH side. 2. Remove the front muffler (A) on LH and RH side. Tightening torque : 39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m ...

See also:

Presure Switch Description and Operation
Description The oil pressure switch detects any abnormal hydraulic pressure to the 35R clutch in the N range. ...

Compressor Schematic Diagrams
Circuit diagram 1. Air compressor connector [Motor power connector (A)][Exhaust valve connector (B)][Temperature sensor connector (C)] 2. Air compressor terminal function [Motor power] ...

Power steering pump, belt and hoses
Check the power steering pump and hoses for leakage and damage. Replace any damaged or leaking parts immediately. Inspect the power steering belt (or drive belt) for evidence of cuts, cracks, exce ...