Hyundai Equus: Steering Wheel Remote Controller (SWRC) Description and Operation
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Body Electrical System / Premium AVN System / Steering Wheel Remote Controller (SWRC) Description and Operation
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Body Electrical System / Premium AVN System / Steering Wheel Remote Controller (SWRC) Description and Operation
| Description |
The steering wheel remote controller (SWR) is composed of
four switches and the right top switch is equipped with the Body CAN
communication module.
The left bottom remote controller is either a general type or
a haptic type. It collects the signals from the other three switches
and output them as CAN signals.
These CAN signals are delivered through SRC (clock spring) to BCM via Body CAN.
BCM deliver them via M CAN to the dashboard and AVN system so
that they can be used for the operation of the dashboard and AVN
system.
Steering Wheel Remote Controller (SWRC) Schematic Diagrams
Circuit Diagram
...
Steering Wheel Remote Controller (SWRC) Repair procedures
Inspection
1.
Check for resistance between terminals in each switch position.
[LH Top (Audio)]
SwitchConnectorterminalResistance(±5%)Volume Down6-7240 xSeek Down510 xMode940 xVolume Up1.69 kxSe ...
See also:
Drive belts
Inspect all drive belts for evidence of cuts, cracks, excessive wear or oil saturation
and replace if necessary. ...
Fuse/relay panel description
Inside the fuse/relay panel covers, you can find the fuse/relay label describing
fuse/relay name and capacity.
✽ NOTICE
Not all fuse panel descriptions in this manual may be applicable to ...
Inhibitor Switch Description and Operation
Description
Inhibitor Switch monitors the lever's position(PRND) and is used to control gear setting signals. ...
Categories
Hyundai Equus Manuals
© 2011-2026 Copyright www.heqmanual.com