Hyundai Equus: Description and Operation
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Body Electrical System / Multifunction Switch / Description and Operation
Second generation VI (2009–2026) / Hyundai Equus VI 2009-2026 Service Manual / Body Electrical System / Multifunction Switch / Description and Operation
| Description |
Refer to the "Body Network System" for the abbreviation information. |
Schematic Diagrams
Circuit Diagram
...
Repair procedures
Removal
1.
Remove the steering column upper and lower shrouds after loosening screws.
2.
Disconnect the multifunction switch connector (A).
3.
Remove the wiper & washer switch (A) by p ...
See also:
In-car Sensor Description and Operation
Description
An in-car air temperature sensor is located in the heater control.
The sensor contains a thermistor which measures the
temperature of the cabin. The signal determined by the resistan ...
Knock Sensor (KS) Repair procedures
Removal
1.
Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2.
Remove the intake manifold (Refer to “Intake And Exhaust System” in EM group).
3.
Disconnect ...
Power Door Mirror Actuator Repair procedures
Inspection
1.
Remove the front door quadrant inner cover. Take care not to damage fixing clips.
(Refer to Body - "Front Door")
2.
Disconnect the power door mirror connector from the harness. ...
Categories
Hyundai Equus Manuals
2011-2026 Copyright www.heqmanual.com