Hyundai Equus: Height Adjust Components and Components Location

Front Seat Belt Pretensioner Repair procedures

Replacement     • When installing the belt, make sure not to damage the pretensioner. 1. Remove the safety belt (A) by turning it in the direction of arrow using a fla ...

Height Adjust Repair procedures

Replacement 1. Remove the front seat belt upper anchor. (Refer to Front Seat Belt - "Front Seat Belt Pretensioner") 2. After loosening the mounting bolts, then remove the height adjustor (A) ...

See also:

Middle Speed Sensor Specifications
Specifications x Type: Hall effect sensor x Specifications Operation condition (°C)°F ((-)40~150)) -40~302Air gap(mm)in.1.3(0.0512)Output voltage(V)High1.4Low0.7 ...

Rear combination lamp Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Loose the nuts holding the rear combination lamp (outside) then disconnect the connector (A). 3. Remove the rear combination la ...

Center Pillar Trim Components and Components Location
Component Location 1. Center pillar lower trim2.Center pillar upper trim ...