>
Rail Pressure Sensor (RPS) Repair procedures
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the RPS at idle and various engine speed.
ConditionOutput Voltage (V)Idle Approx. 1.21, ...
BlueLink Control Switch Repair procedures
Removal
1.
Remove the Electro chromic Inside rear view mirror.
(Refer to Electro Chromic Inside Rear View Mirror)
Installation
1.
Install the Electro chromic Inside rear view mirror.
(Refer ...
Repair procedures
Adjustment
TCM Learning
When shift shock is occurred or parts related with the transmission are replaced, TCM learning should be performed.
In the following case, TCM learning is required.
...