>
Inspection |
1. |
Remove the cowl top cover (A).
(Refer to Body - "Wiper") |
2. |
Disconnect the windshield deicer connector (A) from the wiper motor linkage. |
3. |
Check for continuity between the terminals of deicer lines. |
4. |
Turn the ignition switch ON and the windshield deicer switch
ON, then measure the voltage between the terminals of harness side
deicer connector.
|
Maintenance under severe usage conditions
The following items must be serviced more frequently on cars normally used under
severe driving conditions. Refer to the chart below for the appropriate maintenance
intervals.
R : Replace
I : I ...
Multi-view Camera Unit Components and Components Location
Components
...
Damper Clutch Control Solenoid Valve Description and Operation
Description
Damper Clutch control solenoid valve is attached to the valve
body. This variable force solenoid valve directly controls the
hydraulic pressure inside the Damper Clutch. ...