>
Removal and Installation |
Water Pump |
1. |
Disconnect the negative terminal (A) from the battery.
|
2. |
Remove the air duct, air intake hose and the air cleaner assembly.
(Refer to Engine and transaxle assembly in this group) |
3. |
Loosen the drain plug (A) and drain the engine coolant. Remove the radiator cap (B) to speed draining.
|
4. |
Disconnect the radiator upper hose (A) and lower hose (B). |
5. |
Turn the tensioner (B) clockwise and loosen, then remove the drive belt (A). |
6. |
Remove the water pump pulley (A).
|
7. |
Remove the water pump (A).
|
8. |
Installation is reverse order of removal. |
1. |
Remove the intake manifold module.
(Refer to intake and exhaust system in this group) |
2. |
Remove the injector & rail assembly.
(Refer to FL group) |
3. |
Remove the water outlet pipe (A) and the water inlet pipe (B).
|
4. |
Installation is reverse order of removal. |
Front Lower Arm Repair procedures
Removal
Remove the lateral arm.
1.
Remove the front wheel and tire (A) from front hub .
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
•
...
Description and Operation
Description
Exhaust emissions (CO, HC, NOx) are controlled by a
combination of engine modifications and the addition of special control
components.
Modifications to the combustion chamber, int ...
Front Seat Cushion Cover Components and Components Location
Component Location
1. Front seat cushion cover
...