>

Hyundai Equus: Warning type - Blind spot detection system (BSD) (If equipped) - Driving your vehicle - Hyundai Equus 2009-2024 Owners ManualHyundai Equus: Warning type

The system will activate when:

1.The system is on
2.Vehicle speed is above 9.3 mph (15 km/h)
3.Other vehicles are detected in the rear side

If a vehicle is detected within the boundary of the system, a warning light will


If a vehicle is detected within the boundary of the system, a warning light will illuminate on the outside rearview mirror and the head up display.

If the detected vehicle is not in warning range, the warning will turn off according to driving conditions.

The second stage alarm will activate when:


The second stage alarm will activate when:

1.The first stage alert is on
2.The turn signal is on to change a lane

When the second stage alert is activated, a warning light will blink on the outside rearview mirror, the head up display and a alarm will sound.

If you move the turn signal switch to the original position, the second stage alert will be deactivated.

    Operating conditions
    The indicator on the switch will illuminate when the BSD (Blind spot detection) system switch is pressed with the Engine Start/Stop Button ON. If vehicle speed exceeds 9.3 mph (15 km/h), the system ...

    Detecting sensor
    The sensors are located inside of the rear bumper. Always keep the rear bumper clean for the system to work properly. ...

    See also:

    Description and Operation
    Description The charging system included a battery, an alternator with a built-in regulator, and the charging indicator light and wire. The Alternator has eight built-in diodes, each rectifying AC ...

    Drive belts
    Inspect all drive belts for evidence of cuts, cracks, excessive wear or oil saturation and replace if necessary. ...

    Seat Belt Pretensioner (BPT) Components and Components Location
    Components ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com