>

Hyundai Equus: Vehicle certification label - Specifications, Consumer information and Reporting safety defects - Hyundai Equus 2009-2026 Owners ManualHyundai Equus: Vehicle certification label

The vehicle certification label attached on the driver’s side center pillar gives


The vehicle certification label attached on the driver’s side center pillar gives the vehicle identification number (VIN).

    Vehicle identification number (VIN)
    The vehicle identification number (VIN) is the number used in registering your car and in all legal matters pertaining to its ownership, etc. The number is punched on the floor under the front ...

    Tire specification and pressure label
    The tires supplied on your new vehicle are chosen to provide the best performance for normal driving. The tire label located on the driver's side center pillar gives the tire pressures re ...

    See also:

    Air Quality Sensor (AQS) Repair procedures
    Inspection 1. Turn the ignition switch OFF. 2. Connect the GDS. 3. Check the output voltage of AQS between terminal 2 and 3. 1. DC 12V( Ignition)2. Sensor ground3. AQS signal Specif ...

    High beam operation
    To turn on the high beam headlights, push the lever away from you. Pull it back for low beams. The high beam indicator will light when the headlamp high beams are switched on. To prevent the ...

    Rolling code programming
    Rolling code devices which are "code-protected" and manufactured after 1996 may be determined by the following: Reference the device owner's manual for verification. The handheld ...

    Categories

    Hyundai Equus Manuals

    © 2011-2026 Copyright www.heqmanual.com