>
Hyundai Equus Manuals

Hyundai Equus: Upper Arm Repair procedures - Air Suspension System - Suspension System - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Upper Arm Repair procedures

Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Suspension System / Air Suspension System / Upper Arm Repair procedures

Removal
[Front Upper arm]
1.
Removal the front wheel & tire.
Tightening torque :
90.0 ~ 110.0 N.m(9.0 ~ 11.0 kgf.m, 65.0 ~ 80.0 lb-ft)
2.
Removal the air strut assembly.
(Refer to air strut assembly.)
3.
Disconnect the upper arm (A) with the air strut assembly bracket (B) by loosening the bolt.
Tightening torque :
100.0 ~ 120.0 N.m(10.0 ~ 12.0 kgf.m, 72.0 ~ 87.0 lb-ft)

4.
Installation is the reverse of removal.
[Rear Upper arm]
Replacement the front upper arm
1.
Remove the rear wheel & tire.
Tightening torque :
90.0 ~ 110.0 N.m(9.0 ~ 11.0 kgf.m, 65.0 ~ 80.0 lb-ft)
2.
Disconnect the rear front upper arm (A) from the rear axle by loosening the bolt & nut.
Tightening torque :
120.0 ~ 140.0 N.m(12.0 ~ 14.0 kgf.m, 87.0 ~ 101.0 lb-ft)

3.
Disconnect the rear front upper arm (A) from the rear sub frame by loosening the bolt & nut.
Tightening torque :
120.0 ~ 140.0 N.m(12.0 ~ 14.0 kgf.m, 87.0 ~ 101.0 lb-ft)

4.
Installation is the reverse of removal.
Replacement the rear upper arm
1.
Remove the rear wheel & tire.
Tightening torque :
90.0 ~ 110.0 N.m(9.0 ~ 11.0 kgf.m, 65.0 ~ 80.0 lb-ft)
2.
Disconnect the rear upper arm (B) from the rear axle by loosening the split pin & nut (A).
Tightening torque :
80.0 ~ 90.0 N.m(8.0 ~ 9.0 kgf.m, 58.0 ~ 65.0 lb-ft)

3.
Disconnect the rear upper arm from the rear carrier using a SST (09568-2J100).

4.
Disconnect the rear front upper arm (A) from the rear sub frame by loosening the flange bolt & lock nut.
Tightening torque :
120.0 ~ 140.0 N.m(12.0 ~ 14.0 kgf.m, 87.0 ~ 101.0 lb-ft)

5.
Installation is the reverse of removal.
   
Do not use the lock nuts again.
Inspection
1.
Check the bushing for wear and deterioration.
2.
Check the ball joint for rotating torque.
    Stabilizer Bar Repair procedures
    Removal [Front Stabilizer Bar] 1. Removal the front wheel & tire. Tightening torque : 90.0 ~ 110.0 N.m(9.0 ~ 11.0 kgf.m, 65.0 ~ 80.0 lb-ft) 2. Disconnect the stabilizer link (A) ...

    Trailing Arm Repair procedures
    Removal 1. Remove the rear wheel & tire. Tightening torque : 90.0 ~ 110.0 N.m(9.0 ~ 11.0 kgf.m, 65.0 ~ 80.0 lb-ft) 2. Disconnect the trailing arm (A) from the rear axle by loosening ...

    See also:

    Start/Stop Button Components and Components Location
    Component ...

    Head Lamps Description and Operation
    HID Head Lamp 1. Bulb (1) Elements Xenon gas: Xenon gas activates the initial reaction for rapid illuminating. Molybdenum electrode: anode arcing Metal halide salts: color composing component ...

    Electronic Active Headrest Schematic Diagrams
    Circuit Diagram ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com