• |
Put on gloves to protect your hands. |
|
• |
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage. |
• |
Take care not to scratch the body surface. |
|
1. |
Remove the trunk lid trim.
(Refer to Trunk Lid - "Trunk Lid Trim") |
2. |
Loosen the trunk lid key holder mounting bolts. |
3. |
Disconnect the trunk lid key holder cable (A) and remove the trunk lid key holder (B).
Tightening torque :
6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)
|
|
4. |
Install in the reverse order of removal.
• |
Make sure the trunk lid locks/unlocks and opens/closes properly. |
• |
Replace any damaged clips. |
|
|
Replacement
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protec ...
Component Location
1. Trunk lid back panel
...