>

Hyundai Equus: Trunk Lid Back Panel Repair procedures

Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Body (Interior and Exterior) / Trunk Lid / Trunk Lid Back Panel Repair procedures

Replacement

•	Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Take care not to scratch the body surface.

1.	Remove the trunk lid trim. (Refer to Trunk Lid - "Trunk Lid Trim")

2.	Loosen the mounting nut, remove the trunk lid panel (A).

3.

Install in the reverse order of removal.

•	Make sure the connector are connected in properly.

•	Replace any damaged clips.

Trunk Lid Back Panel Components and Components Location

Component Location 1. Trunk lid back panel ...

Trunk Lid Weatherstrip Repair procedures

Replacement 1. Remove the trunk lid weatherstrip (A). • Do not apply sealant to the body. 2. Install in the reverse order of removal. • ...

See also:

Smart cruise control vehicle to vehicle distance
To set vehicle to vehicle distance: This function allows you to program the vehicle to maintain relative distance to the vehicle ahead without depressing the accelerator pedal or brake pedal. ...

Tire rotation
To equalize tread wear, it is recommended that the tires be rotated every 7,500 miles (12,000 km) or sooner if irregular wear develops. During rotation, check the tires for correct balance. When r ...

Timing Chain Repair procedures
Removal Engine removal is required for this procedure. • Use fender covers to avoid damaging painted surfaces. • To avoid damage, unplug the wiring connectors carefu ...

Categories

Hyundai Equus Manuals

© 2011-2024 Copyright www.heqmanual.com