>

Hyundai Equus: Trunk Lid Assembly Repair procedures

Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Body (Interior and Exterior) / Trunk Lid / Trunk Lid Assembly Repair procedures

Replacement

•	Wear gloves to protect hands from injury.

•	When removing and installing the trunk lid, an assistant is necessary.

1.	Remove the trunk lid trim. (Refer to Trunk Lid - "Trunk Lid Trim")

2.	Disconnect the connectors and trunk lid wiring harness (A).

3.

After loosening the mounting bolts, then remove the trunk lid assembly (B).

Tightening torque :

21.6 ~ 26.5 N.m (2.2 ~ 2.7 kgf.m, 15.9 ~ 19.5 lb-ft)

4.

Install in the reverse order of removal.

•	Make sure the trunk lid locks/unlocks and opens/closes properly.

•	Adjust the trunk lid alignment.

•	Make sure the connectors are connected in properly.

•	Replace any damaged clips.

Trunk Lid Assembly Components and Components Location

Component Location 1. Trunk lid assembly ...

Trunk Lid Trim Components and Components Location

Component Location 1. Trunk lid trim ...

See also:

Recommended cold tire inflation pressures
All tire pressures (including the spare) should be checked when the tires are cold. “Cold Tires” means the vehicle has not been driven for at least three hours or driven less than one mile (1.6 km ...

For best battery service
The battery is in the trunk. Keep the battery securely mounted. Keep the battery top clean and dry. Keep the terminals and connections clean, tight, and coated with petroleum jelly or t ...

Center Fascia Panel Components and Components Location
Component Location 1. Center fascia upper panel2. Center fascia lower panel ...

Categories

Hyundai Equus Manuals

© 2011-2024 Copyright www.heqmanual.com