>
Inspection |
1. |
Turn ignition switch OFF. |
2. |
Disconnect the E Module connector. |
3. |
Measure resistance between sensor signal terminal and sensor ground terminal. |
4. |
Check that the resistance is within the specification.
|
Windshield Deicer Repair procedures
Inspection
1.
Remove the cowl top cover (A).
(Refer to Body - "Wiper")
2.
Disconnect the windshield deicer connector (A) from the wiper motor linkage.
3.
Check for continuity between the ...
Trunk Lid Assembly Components and Components Location
Component Location
1. Trunk lid assembly
...
Transmission Oil Temperature Sensor Schematic Diagrams
Circuit Diagram
...