Transmission oil temperature sensor monitors the automatic Transmission fluid's temperature and conveys the readings to TCM.
It is an NTC (Negative Thermal Coefficient) sensor whose
resistance has an inversely proportional relationship with the
temperature level. Data produced by this sensor is used to identify
damper clutch activation and deactivation zones within the low
temperature and high temperature range and to compensate hydraulic
pressure levels during gear changes.
Inspection
TCM Problem Inspection Procedure
1.
TEST TCM GROUND CIRCUIT: Measure resistance between TCM and
chassis ground using the backside of TCM harness connector as TCM side
check poin ...
Specifications
x Type: Negative Thermal Coefficient Type
Temp.[(°C)°F]Resistance (kx)(-40)-40139.5(-20)-4.047.4(0)32.018.6(20)68.08.1(40)104.03.8(60)140.01.98(80)176.01.08(100)212.00.63(120)248 ...
See also:
Steering Column Shroud Panel Repair procedures
Replacement
[Steering column shroud lower panel]
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it w ...
Photo Sensor Repair procedures
Inspection
1.
Turn the ignition switch ON.
2.
Connect the GDS.
3.
Emit intensive light toward the photo sensor using a lamp, and check the output voltage change.
4.
The voltage will ri ...
General Information
The Micro 570 Analyzer
The Micro 570 Analyzer provides the ability to test the
charging and starting systems, including the battery, starter and
alternator.
x Because of ...