>
Description |
• |
Monitors the vehicle's operating conditions to determine the optimal gear setting. |
• |
Performs a gear change if the current gear setting differs from the identified optimal gear setting. |
• |
Determines the need for damper clutch (D/C) activation and engages the clutch accordingly. |
• |
Calculates the optimal line pressure level by constantly monitoring the torque level and adjusts the pressure accordingly. |
• |
Diagnoses the automatic transmission for faults and failures. |
Compressor Description and Operation
Description
The compressor operates in all events except the system air
filling and two solenoid valves (referred to as reverse valve, on-off
control, and normal open) are embedded.
Air dryer ...
Driver Airbag (DAB) Module and Clock Spring Description and Operation
Description
The Driver Airbag (DAB) is installed in the steering wheel
and electrically connected to SRSCM via the clock spring. It protects
the driver by deploying the airbag when frontal cras ...
Crankshaft Position Sensor (CKPS) Troubleshooting
Signal Waveform
This example shows a typical Crankshaft Position Sensor (CKPS) and Camshaft Position Sensor (CMPS) waveform at idle. ...