>
Removal |
1. |
Remove the rear wheel & tire.
|
2. |
Disconnect the trailing arm (A) from the rear axle by loosening the bolt & nut.
|
3. |
Disconnect the trailing arm (A) from the rear axle by loosening the bolt & nut.
|
4. |
Installation is the reverse of removal. |
Description and Operation
Description
Mobile Telemetics System (MTS)
Hyundai motor companies are now faced with the task of
shifting their paradigm from vehicle-centered services to customer
valuecentered services, wit ...
Steering Wheel Remote Controller (SWRC) Repair procedures
Inspection
1.
Check for resistance between terminals in each switch position.
[LH Top (Audio)]
SwitchConnectorterminalResistance(±5%)Volume Down6-7240 xSeek Down510 xMode940 xVolume Up1.69 kxSee ...
Description and Operation
Description
Active type ECS is applied and it includes the self leveling
function.As shown in the picture, it consists of air spring, damper,
reservoir tank, compressor (with dryer), solenoid ...