>
Hyundai Equus Manuals

Hyundai Equus: Trailing Arm Repair procedures - Rear Suspension System - Suspension System - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Trailing Arm Repair procedures

Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Suspension System / Rear Suspension System / Trailing Arm Repair procedures

Removal
1.
Remove the rear wheel and tire (A) from rear hub .
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
   
•
Be careful not to damage to the hub bolts when removing the rear wheel and tire (A).

2.
Loosen the bolt & lock nut (A).
Tightening torque:
100.0 ~ 120.0 N.m (10.0 ~ 12.0 kgf.m, 72.0 ~ 87.0 lb-ft)

3.
Disconnect the trailing arm (B) from the rear axle by loosening the bolt & nut (A).
Tightening torque:
110.0 ~ 120.0 N.m (11.0 ~ 12.0 kgf.m, 65.0 ~ 87.0 lb-ft)

4.
Install in the reverse order of removal.
5.
Check the alignment.
(Refer to Tires/Wheels - "Alignment")
Inspection
1.
Check the bushing for wear and deterioration.
2.
Check the trailing arm deformation.
3.
Check the all bolts.
    Rear Assist Arm Repair procedures
    Removal 1. Remove the rear wheel and tire (A) from rear hub . Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)     • Be careful not to damage t ...

    Rear Lower Arm Repair procedures
    Removal 1. Remove the rear wheel and tire (A) from rear hub . Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)     • Be careful not to damage t ...

    See also:

    Rear Remote Controller (RRC) Components and Components Location
    Components ...

    Spliter Unit Description and Operation
    Description The spliter unit receive the LVDS signal from AVN head unit and send it to left/right rear monitor. (LVDS : Low Voltage Differential Signaling ) ...

    Schematic Diagrams
    Circuit Diagram ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com