Hyundai Equus: To Reset the Power Trunk
Second generation VI (2009–2024) / Hyundai Equus 2009-2024 Owners Manual / Features of your vehicle / Trunk / To Reset the Power Trunk
If the battery has been discharged or disconnected, or if the related fuse has been replaced or disconnected, reset the Power Trunk as follows:
1. Move the shift lever to the P(Park) position.
2. Close the trunk manually.
If the Power Trunk doesn't work properly after performing the above procedure, have the system checked by an authorized EQUUS dealer.
Power Trunk (if equipped)
(1) Power Trunk Main Control button
(2) Power Trunk Open button
(3) Power Trunk Close button
(4) Power Trunk Lock button
To open:
1. Make sure the shift lever is in P(Park).
2. Then do one o ...
Trunk Lid Control Button
When the trunk lid control button is ON (depressed), the power trunk can be controlled
with the power trunk main control button, power trunk open, close button, and the
smart key.
When this t ...
See also:
Tire sidewall labeling
This information identifies and describes the fundamental characteristics of
the tire and also provides the tire identification number (TIN) for safety standard
certification. The TIN can be use ...
Manifold Absolute Pressure Sensor (MAPS) Schematic Diagrams
Circuit Diagram
...
Side Impact Sensor (SIS) Description and Operation
Description
The Side Impact Sensor (SIS) system consists of two kinds of
side impact sensor which are installed at each center of the front door
module (left and right) and two rear sensors whi ...
Categories
Hyundai Equus Manuals
