>

Hyundai Equus: Tire specification and pressure label - Specifications, Consumer information and Reporting safety defects - Hyundai Equus 2009-2026 Owners ManualHyundai Equus: Tire specification and pressure label

The tires supplied on your new vehicle are chosen to provide the best performance


The tires supplied on your new vehicle are chosen to provide the best performance for normal driving.

The tire label located on the driver's side center pillar gives the tire pressures recommended for your car.

    Vehicle certification label
    The vehicle certification label attached on the driver’s side center pillar gives the vehicle identification number (VIN). ...

    Engine number
    The engine number is stamped on the engine block as shown in the drawing. ...

    See also:

    Photo Sensor Repair procedures
    Inspection 1. Turn the ignition switch ON. 2. Connect the GDS. 3. Emit intensive light toward the photo sensor using a lamp, and check the output voltage change. 4. The voltage will ri ...

    Heated Oxygen Sensor (HO2S) Repair procedures
    Inspection 1. Turn the ignition switch OFF. 2. Disconnect the HO2S connector. 3. Measure resistance between the HO2S terminals 3 and 4. 4. Check that the resistance is within the speci ...

    Head Up Display Switch Repair procedures
    Removal 1. Disconnect the negative (-) battery. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lower Panel") 3. Remove the crash pad lower panel and then push the head u ...

    Categories

    Hyundai Equus Manuals

    © 2011-2026 Copyright www.heqmanual.com