>
To equalize tread wear, it is recommended that the tires be rotated every 7,500 miles (12,000 km) or sooner if irregular wear develops.
During rotation, check the tires for correct balance.
When rotating tires, check for uneven wear and damage. Abnormal wear is usually caused by incorrect tire pressure, improper wheel alignment, outof- balance wheels, severe braking or severe cornering. Look for bumps or bulges in the tread or side of tire.
Replace the tire if you find either of these conditions. Replace the tire if fabric or cord is visible. After rotation, be sure to bring the front and rear tire pressures to specification and check lug nut tightness.
Disc brake pads should be inspected for wear whenever tires are rotated.
✽ NOTICE
The front tire size is different from the rear tire size. So when you rotate tires, check the tire and wheel size.
WARNING
Spark plugs
Make sure to install new spark plugs of the correct heat range. ...
Specifications
Specifications
DescriptionSpecificationsLimitGeneralTypeV-type, DOHCNumber of cylinders8Bore96mm (3.7795in)Stroke87mm (3.4252in)Total displacement5.038 cc (307.3 cu.in)Compression ratio11.5 : 1Fi ...
Center Fascia Panel Repair procedures
Replacement
[Center Fascia Upper Panel]
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
pr ...