>
Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the front AVN monitor.
(Refer to "Premium AVN System") |
3. |
Remove the MTS unit after loosening the screw and nuts. |
4. |
Disconnect the cables and connectors from the MTS unit. |
Installation |
1. |
Install the MTS unit after connecting the cables and connectors. |
2. |
Install the front AVN monitor. |
3. |
Connect the negative (-) battery terminal. |
Vehicle curb weight
This is the weight of your new vehicle when you picked it up from your dealer
plus any aftermarket equipment. ...
Engine overheat
If your temperature gauge indicates overheating, you experience a loss of power,
or hear loud pinging or knocking, the engine is probably too hot. If this happens,
you should:
1.Pull off the road ...
Specifications
Specifications
ItemsSpecificationRated voltageDC 12VOperating voltage9V ~ 16VOperating speed15x/h ~ 250x/hSensible distance70m (Sedan)Curvature radiusStart : More than 100mStop : Less than 70mFre ...