>
Inspection |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Open the sunglass case cover from the overhead console then
remove the 2 screws holding the overhead console. Disconnect the switch
connector (6P) and Map lamp connector (16P), and then remove the
overhead console lamp. |
3. |
Check for continuity between the terminals. If the continuity is not as specified, replace the sunroof switch. |
Front Wheel Speed Sensor Components and Components Location
Components
1. Front wheel speed sensor cable2. Front wheel speed sensor
...
Components and Components Location
Components
1. Front bumper cover2. Radiator grill upper guide
...
Components and Components Location
Components
1. Cowl side trim2. Front door scuff trim3. Center pillar lower trim4. Rear door scuff trim5. Rear pillar trim6. Rear wheel house trim7. Rear package tray trim 8. Front pillar trim
...