>
1. Check that the shift lever is in P (Park) and the Engine Start/Stop Button
is in the ON position.
2. Adjust the driver’s seat, outside rearview mirrors, steering wheel and HUD (Head-Up
Display) height to positions comfortable for the driver.
3. Press the SET button on the control panel. The system will beep once.
4. Press one of the memory buttons (1 or 2) within 5 seconds after pressing the
SET button. The system will beep twice when the positions of the driver's seat,
outside rearview mirrors, steering wheel and HUD (Head-Up Display) height have been
successfully stored.
Headlight
When the headlight(light switch in the headlight or AUTO position) is on and
all doors (and trunk) are locked and closed, the position light and headlight will
come on for 15 seconds if any of the ...
Center Fascia Panel Repair procedures
Replacement
[Center Fascia Upper Panel]
•
Put on gloves to protect your hands.
•
When prying with a flat-tip screwdriver, wrap it with
pr ...
Intake Air Temperature Sensor (IATS) Schematic Diagrams
Circuit Diagram
...