>
Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the AVN head unit.
(Refer to Premium AVN System - "AVN Head Unit") |
3. |
Remove the interior 1 antenna (A) after disconnecting the connector and loosening the mounting nuts. |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the floor console assembly.
(Refer to Body - "Floor Console Assembly") |
3. |
Remove the interior 2 antenna (A) after disconnecting the connector and loosening the mounting nuts. |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the rear seat.
(Refer to Body - "Rear Seat Assembly") |
3. |
Remove the rear package tray trim.
(Refer to Body - "Rear Package Tray Trim") |
4. |
Remove the interior 3 antenna (A) after disconnecting the connector and loosening the mounting nuts. |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the trunk carpet (A). |
3. |
Remove the trunk antenna (A) after disconnecting the connector and loosening the mounting nuts. |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the rear bumper cover.
(Refer to Body - "Rear Bumper Cover") |
3. |
Remove the external bumper antenna (A) after loosening the mounting screws. |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the door outside handle cover (A) after seperating the plug hole (B) from the door and loosening the mounting bolt.
|
3. |
Remove the outside handle (A) by sliding it rearward. |
4. |
Disconnect the front door outside handle connector (A). |
Installation |
1. |
Install the interior 1 antenna after connecting the connector. |
2. |
Install the AVN head unit. |
3. |
Connect the negative (-) battery terminal. |
1. |
Install the interior 2 antenna after connecting the connector. |
2. |
Install the floor console assembly. |
3. |
Connect the negative (-) battery terminal. |
1. |
Install the interior 3 antenna after connecting the connector. |
2. |
Install the rear package tray trim. |
3. |
Install the rear seat. |
4. |
Connect the negative (-) battery terminal. |
1. |
Install the trunk antenna after connecting the connector. |
2. |
Install the trunk carpet. |
3. |
Connect the negative (-) battery terminal. |
1. |
Install the bumper antenna after connecting the connector. |
2. |
Install the rear bumper cover. |
3. |
Connect the negative (-) battery terminal. |
1. |
Install the door outside handle after connecting the connector. |
2. |
Install the door trim. |
3. |
Connect the negative (-) battery terminal. |
Injector Drive Box (IDB) Schematic Diagrams
Injector Drive Box (IDB)
IDB Connector
ECM Terminal Function
Connector [C200-IDB]
Pin No.DescriptionConnected to1ECM groundChassis ground2ECM groundChassis ground3Battery power (B+)Main rela ...
Battery Troubleshooting
Troubleshooting
...
Resetting the Sunroof
If the battery has been discharged or disconnected, or if the related fuse has
been replaced or disconnected, reset the Sunroof as follows:
1. The Engine Start/Stop Button must be in the ON positio ...