>

Hyundai Equus: Side Sill Molding Repair procedures - Body Side Molding - Body (Interior and Exterior) - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Side Sill Molding Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Take care not to scratch the body surface.
1.
Loosen the side sill molding mounting screws.
2.
Using a screwdriver or remover, remove the side sill molding (A).

3.
Install in the reverse order of removal.
   
Replace any damaged clips.
    Waist Line Molding Repair procedures
    Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply prote ...

    B Pillar Garnish Repair procedures
    Replacement [B Pillar upper garnish]     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protec ...

    See also:

    Cool and Warm Box Description and Operation
    Description Cool and warm box is a compartment where you can keep items cool or warm. The sytem is a enviromentally friendly system that operates independently from the heater and A/C system. ...

    Schematic Diagrams
    Circuit Diagram ...

    To control the vehicle height
    Push the vehicle height control button to select the HIGH mode that makes the vehicle higher than the NORMAL mode and the indicator light on the vehicle height control button will illuminate. It i ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com