Hyundai Equus: Side Impact Sensor (SIS) Description and Operation
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Restraint / SRSCM / Side Impact Sensor (SIS) Description and Operation
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Restraint / SRSCM / Side Impact Sensor (SIS) Description and Operation
| Description |
The Side Impact Sensor (SIS) system consists of two kinds of
side impact sensor which are installed at each center of the front door
module (left and right) and two rear sensors which are installed in the
rear pillar (left and right).
| • |
The Front Side Impact Sensor is also called P-SIS because it detects pressure due to collision at its mounting location. |
| • |
The Rear Side Impact Sensor is also called A-SIS because it detects acceleration due to collision at its mounting location. |
SRSCM decides deployment of the airbag and the time of
deployment through the collision signal of the SIS when collision
occurrs.
Front Impact Sensor (FIS) Repair procedures
Removal
•
Removal of the airbag must be performed according to the precautions/ procedures described previously.
•
Before disconnecting the front impact sensor connec ...
Side Impact Sensor (SIS) Components and Components Location
Components
...
See also:
Center Pillar Trim Components and Components Location
Component Location
1. Center pillar lower trim2.Center pillar upper trim
...
Automatic heating and air conditioning
1. Press the AUTO button.
The modes, fan speeds, air intake and air-conditioning will be controlled automatically
according to the temperature setting.
2. Press the TEMP button to set the desi ...
Tire traction
Tire traction can be reduced if you drive on worn tires, tires that are improperly
inflated or on slippery road surfaces. Tires should be replaced when tread wear
indicators appear. To reduce the ...
Categories
Hyundai Equus Manuals
© 2011-2024 Copyright www.heqmanual.com