>

Hyundai Equus: Side Impact Sensor (SIS) Components and Components Location - SRSCM - Restraint - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Side Impact Sensor (SIS) Components and Components Location

Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Restraint / SRSCM / Side Impact Sensor (SIS) Components and Components Location

Components

    Side Impact Sensor (SIS) Description and Operation
    Description The Side Impact Sensor (SIS) system consists of two kinds of side impact sensor which are installed at each center of the front door module (left and right) and two rear sensors whi ...

    Side Impact Sensor (SIS) Repair procedures
    Removal     • Removal of the airbag must be performed according to the precautions/procedures described previously. • Before disconnecting the side impact sensor connecto ...

    See also:

    Recommended cold tire inflation pressures
    All tire pressures (including the spare) should be checked when the tires are cold. “Cold Tires” means the vehicle has not been driven for at least three hours or driven less than one mile (1.6 km ...

    Repair procedures
    Adjustment TCM Learning When shift shock is occurred or parts related with the transmission are replaced, TCM learning should be performed. In the following case, TCM learning is required. ...

    Front Pillar Trim Components and Components Location
    Component Location 1. Front pillar trim ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com