Hyundai Equus: Shift Lever Components and Components Location

Inhibitor Switch Repair procedures

Inspection     • Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Power Circuit Inspection 1. ...

Shift Lever Repair procedures

Removal 1. Remove the center console. (Refer to Body - " Floor Consol") 2. Disconnect the sports mode connector (A). 3. Remove the shift cable assembly (A) from the shift lever assembl ...

See also:

Sunroof Motor Repair procedures
Replacement 1. Disconnect the negative (-) battery terminal. 2. Remove the overhead console then remove the sun roof motor mounting screws (3EA). And then remove the sunroof motor (A) after ...

Tire chains
Tire chains, if necessary, should be installed on the drive wheels (rear wheels). Be sure that the chains are installed in accordance with the manufacturer's instructions. To minimize tire and c ...

Oil Pressure Switch Repair procedures
Inspection 1. Check the continuity between the terminal and the body with an ohmmeter. If there is no continuity, replace the oil pressure switch. 2. Check the continuity between the terminal ...