>
System Block Diagram |
Component part | Function |
Vehicle-speed sensor, ESP/ABS Control Module | Converts vehicle speed to pulse. |
ECM | Receives signals from sensor and control switches. |
Cruise control indicator | Illuminate when CRUISE main switch is ON (Built into cluster) |
Cruise Control switches | CRUISE switch | Switch for automatic speed control power supply. |
Resume/Accel switch (RES +) | Controls automatic speed control functions by Resume/Accel switch (Set/Coast switch) |
Set/Coast switch (RES -) | |
Cancel switches | Cancel switch | Sends cancel signals to ECM. |
Brake-pedal switch | |
Transaxle range switch (A/T) | |
ETC Motor | Regulates the throttle valve to the set opening by ECM. |
Warning message
If the detecting sensor performance is low or overheated by foreign substances
on the rear bumper, the message will appear to notify the driver.
Also, the message may appear when there is heavy ...
Warning lights
✽ NOTICE - Warning lights
Make sure that all warning lights are OFF after starting the engine. If any
light is still ON, this indicates a situation that needs attention.
Supplemental Restra ...
Exhaust Manifold Repair procedures
Removal and Installation
1.
Disconnect the negative terminal (A) from the battery.
Tightening torque :
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)
2.
Remove the engine room cover (A ...