Hyundai Equus: Schematic Diagrams
| System Diagram |
| 1. Front view camera 2. PGS Unit 3. AVN monitor (LCD) | 4. Front blind camera switch 5. Rear view camera |
Block Diagram & Communications
| Category | Role | Voltage | I/O |
| Ignition Power | · Routes power to PGS. | IGN ON: 12 VIGN OFF: 0V | Input |
| Blind Switch | · Controls the rear view camera (by controlling whether or not
the rear view camera feed is displayed on screen).· Rear view camera
is activated whenever the A/T lever is in R gear. | NORMAL: 12 VPUSH: 0V | Input |
| Power Train CAN | · Steering angle, velocity, and inhibitor switch data. | | Input |
| Multimedia CAN | · DIS: Shares parking direction and parking stage-specific
status info.· AVN: Sends and receives forward view camera, rear view
camera, and camera deactivation commands. | | Input |
| Camera Power | · Camera operation power | While transmission is in neutral,voltage between camera powersupply and ground is measured tobe 6.5V. | Output |
| Camera Ground | |||
| Camera View Change | · Provides a virtual top view using the standard rear view camera feed. | Serial Communication Line | Output |
Description and Operation
Description
Control Function
This system supports 3 kinds of main function.(Front/Rear
video display function, Expected trace of wheels display function,
Parking guide function)
The Front/Rea ...
See also:
SRS Control Module (SRSCM) Repair procedures
Removal
1.
Turn the engine OFF.
2.
Disconnect the battery negative cable and wait for at least three minutes before beginning work.
3.
Remove the floor console assembly.
(Refer to Body - ...
Center Control Panel (CCP) Components and Components Location
Components
...
Fuel requirements
Your new vehicle is designed to obtain maximum performance with UNLEADED FUEL,
as well as minimize exhaust emissions and spark plug fouling.
Your new vehicle is designed to use only unleaded fuel h ...
Categories
Hyundai Equus Manuals
© 2011-2024 Copyright www.heqmanual.com