>

Hyundai Equus: Roof Side Molding Repair procedures

Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Body (Interior and Exterior) / Body Side Molding / Roof Side Molding Repair procedures

Replacement

•	Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Take care not to scratch the body surface.

1.

Using a screwdriver or remover, remove the roof side molding (A).

•	Always replace the roof side molding to a new one.

2.

Install in the reverse order of removal.

•	Replace any damaged clips.

Body Side Molding

...

Front Wheel Guard Repair procedures

Replacement • Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply prote ...

See also:

Rear Seat Belt Buckle Components and Components Location
Component Location (1) [Sedan] 1. Rear seat belt buckle [LH]2. Rear seat belt buckle [RH] [Limousine] 1. Rear seat belt buckle [LH]2. Rear seat belt buckle [RH] ...

This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may c ...

Camshaft Position Sensor (CMPS) Repair procedures
Inspection 1. Check the signal waveform of the CMPS and CKPS using the GDS. Specification: Refer to “Wave Form” Removal • DON’T remove the camshaft position se ...

Categories

Hyundai Equus Manuals

© 2011-2024 Copyright www.heqmanual.com