>
Hyundai Equus Manuals

Hyundai Equus: Repair procedures - Fuel Filler Door - Body (Interior and Exterior) - Hyundai Equus VI 2009-2024 Service ManualHyundai Equus: Repair procedures

Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Body (Interior and Exterior) / Fuel Filler Door / Repair procedures

Replacement
   
•
Put on gloves to protect your hands.
   
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Take care not to scratch the body surface.
1.
Open the fuel filler door cap (A).

2.
Remove the fuel filler door mounting pin (A) by turning it counter clock-wise.

3.
After loosening the mounting clips, then remove the fuel filler door housing (A).
   
•
Pull out from inside of the packing part (B) When removing the fuel filler door housing.

4.
Using a clip remove or remover, remove the fuel fill door (A).

5.
Install in the reverse order of removal.
   
•
Make sure the fuel filler door locks/unlocks and opens/closes properly.
•
Replace any damaged clips.
    Components and Components Location
    Component Location 1. Fuel filler door ...

    Front Door
    ...

    See also:

    Rear Seat Frame Assembly Repair procedures
    Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply pro ...

    Components and Components Location
    Component Location 1 . Front PAS sensor (4EA)2 . Rear PAS sensor (4EA)3. Indicator (warning information displayed on LCD)4 . Parking Assist System (PAS) switch5 . Body Control Module (BCM)6. Clus ...

    Description and Operation
    Description In the state of IGN1 ON, when the multi function switch module detects auto light switch on, tail lamp relay output and head lamp low relay output are controlled according to the ve ...

    Categories

    Hyundai Equus Manuals


    © 2011-2024 Copyright www.heqmanual.com