>
Adjustment |
1. |
After loosening the hinge (A) mounting bolt, adjust the hood (B) by moving it up or down, or right or left. |
2. |
Adjust the hood height by turning the hood overslam bumpers (C). |
3. |
After loosening the hood latch (D) mounting bolts, adjust the latch by moving it up or down, or right or left. |
Alternator Specifications
Specification
ItemSpecificationRated voltage13.5V , 180ASpeed in use1,000 ~ 18,000rpmVoltage regulatorIC Regulator built in type Regulator reform mode voltage (V) [COM terminal]13.85 ~ 14.85 (-35 ...
Sunroof Guide Repair procedures
Replacement
1.
Remove the sunroof assembly.
(Refer to Sunroof - "Sunroof Assembly")
2.
Remove a drip link assembly (A) after lowering a guide thoroughly by pushing a slide to rear.
3.
Rem ...
Rear Seat Assembly Repair procedures
Replacement
[Rear Seat Cushion Assembly]
1.
Pull it up and remove the rear seat cushion assembly (A).
2.
Install in the reverse order of removal.
•
Make sure the co ...