Hyundai Equus: Repair procedures
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Body (Interior and Exterior) / Fender / Repair procedures
Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Body (Interior and Exterior) / Fender / Repair procedures
| Replacement |
|
|
| 1. |
Loosen the front wheel guard mounting clip and screws.
|
| 2. |
Loosen the mounting screws and clips, remove the side sill garnish. |
| 3. |
Loosen the bumper side mounting screw, disconnect the side's bumper (A).
|
| 4. |
Loosen the mounting screws, remove the front bumper side mounting bracket. |
| 5. |
Loosen the fender mounting bolts, remove the fender (A).
|
| 6. |
Install in the reverse order of removal.
|
Components and Components Location
Component Location
1. Fender assembly
...
Hood
...
See also:
Exterior care
Exterior general caution
It is very important to follow the label directions when using any chemical cleaner
or polish. Read all warning and caution statements that appear on the label.
Finish mai ...
Changing tires
1.Park on a level surface and apply the parking brake firmly.
2.Shift the shift lever into P (Park).
3.Activate the hazard warning flasher.
4.Remove the wheel lug nut wrench, jack, jack han ...
Special Service Tools
Special Service Tools
Tool(Number and Name)IllustrationUse09581-11000Piston expanderSpreading the front disc brake piston.09568-2J100Ball joint removerRemoval of the rear assist arm and tie rod e ...
Categories
Hyundai Equus Manuals
© 2011-2024 Copyright www.heqmanual.com