>
Component Replacement after Deployment |
Before doing any SRS repairs, use the GDS to check for DTCs.
Refer to the Diagnostic Trouble Code list for repairing of the related
DTCs. |
- |
SRSCM |
- |
Deployed airbag(s) |
- |
Seat belt pretensioner(s) |
- |
Front impact sensors |
- |
SRS wiring harnesses |
- |
Inspect the clock spring for heat damage.
If any damage found, replace the clock spring.
|
- |
SRSCM |
- |
Deployed airbag(s) |
- |
Side impact sensor(s) for the deployed side(s) |
- |
SRS wiring harnesses
|
- |
Turn the ignition switch ON; the SRS indicator should come on for about six seconds and then go off. |
Checking tire inflation pressure
Check your tires once a month or more.
Also, check the tire pressure of the spare tire.
How to check
Use a good quality gage to check tire pressure.You can not tell if your tires
are properly inf ...
Description and Operation
Description
The starting system includes the battery, starter, solenoid
switch, ignition switch, inhibitor switch (A/T), clutch pedal switch
(M/T), ignition lock switch, connection wires and th ...
Maintenance under severe usage conditions
The following items must be serviced more frequently on cars normally used under
severe driving conditions. Refer to the chart below for the appropriate maintenance
intervals.
R : Replace
I : I ...