Hyundai Equus: Repair procedures
| EOL Input |
| Description |
When shift shock is occurred or parts related with the transmission are replaced, EOL should be performed.
In the following case, EOL is required.
| • |
Transmission assembly replacement |
| • |
TCM replacement |
| Bar code location |
| EOL Input procedure |
| • |
Transmission assembly replacement
Internet :On
Internet :Off
|
| • |
TCM replacement
|
Automatic Transmission Components and Components Location
Components Location
1. Automatic transmission case2. Inhibitor switch3. Manual control lever4. Shift cable bracket5. Oil injection hole6. Air breather hose & pipe7. Oil injection hole (in fac ...
See also:
Crach Pad Center Panel Components and Components Location
Component Location
1. Crash pad center panel
...
27 Brake Control Solenoid Valve Repair procedures
Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the E Module connector.
3.
Measure resistance between sensor signal terminal and sensor ground terminal.
4.
Check that the res ...
Rear Right Door Module (RRDM) Description and Operation
Description
1.
Rear Right Power Window Switch
(1)
Main features
ItemExplanationInstallation positon Rear Right Door TrimComponent configuration
1.
Embedded with LIN Communication IC
2.
...
Categories
Hyundai Equus Manuals
© 2011-2024 Copyright www.heqmanual.com