Hyundai Equus: Repair procedures
| Diagnosis With GDS |
| 1. |
BSD system defects can be quickly diagnosed with the GDS. GDS
operates actuator quickly to monitor, input/output value and self
diagnosis. |
| 2. |
Connect the cable of GDS to the data link connector in driver side crash pad lower panel, turn the power on GDS. |
| 3. |
Select the vehicle model and then BSD system. |
| 4. |
Select "Current Data", if you want to check current data of BSD system.
|
| 5. |
If you want to check each module operation forcefully, select "Actuation test".
|
Description and Operation
Description
The BSD (Blind Spot Detection) system uses a radar sensor to alert the driver while driving.
It senses the rear side territory of the vehicle and provides information to the driver.
- ...
Blind Spot Detection Unit Schematic Diagrams
Circuit Diagram
...
See also:
Changing the coolant
Have coolant changed by an authorized EQUUS dealer according to the Maintenance
Schedule at the beginning of this section.
CAUTION
Put a thick cloth around the radiator cap before refilling the co ...
Intake Air Temperature Sensor (IATS) Schematic Diagrams
Circuit Diagram
...
Upper Arm Repair procedures
Removal
[Front Upper arm]
1.
Removal the front wheel & tire.
Tightening torque :
90.0 ~ 110.0 N.m(9.0 ~ 11.0 kgf.m, 65.0 ~ 80.0 lb-ft)
2.
Removal the air strut assembly.
(Refer ...
Categories
Hyundai Equus Manuals
© 2011-2024 Copyright www.heqmanual.com