>

Hyundai Equus: Repair procedures

Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Body (Interior and Exterior) / Cowl Top Cover / Repair procedures

Replacement

•	Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Take care not to scratch the body surface.

1.

Remove the cap (A) and remove the nuts, then remove the wiper arm (B).

Tightening torque :

22.6 ~ 26.5 N.m (2.3 ~ 2.7 kgf.m, 16.6 ~ 19.5 lb-ft)

2.	Disconnect the nozzle hose (A).

3.	Detach the clips, then remove the cowl top cover (B).

4.

Install in the reverse order of removal.

•	Replace any damaged clips.

Components and Components Location

Component Location 1. Cowl top cover ...

Floor Console

...

See also:

Description and Operation
Description Multi-view Camera System is the system that allows video monitoring of 360 degrees around the vehicle. The system includes 4 ultra optical camera mounted around the vehicle (front, ...

Pre-active Seat Belt (PSB) Schematic Diagrams
Circuit Diagram ...

ON/OFF Solenoid Valve Repair procedures
Inspection 1. Turn ignition switch OFF. 2. Disconnect the E Module connector. 3. Measure resistance between sensor signal terminal and sensor ground terminal. 4. Check that the res ...

Categories

Hyundai Equus Manuals

© 2011-2024 Copyright www.heqmanual.com