>
1.Open the trunk, and remove the towing hook from the tool case.
2.Remove the hole cover by pressing the lower part of the cover on the front or rear bumper.
3.Install the towing hook by turning it clockwise into the hole until it is fully secured.
4.Remove the towing hook and install the cover after use.
G Sensor Description and Operation
Description
There are a total of 3 acceleration sensors in the vehicle
that measure vehicle acceleration and communicate with the ECS ECU. The
ECS ECU calculates the vertical vibration speed, ...
Front Area Module(FAM) Components and Components Location
Components
...
Front Seat Cushion Cover Components and Components Location
Component Location
1. Front seat cushion cover
...