>
Inspection |
1. |
The SJB can be diagnosed by using the GDS. The SJB
communicates with the GDS which then displays inputs and outputs along
with codes. |
2. |
To diagnose the SJB function, select the vehicle model, BCM and SJB. |
3. |
To consult the present input/out value of SJB, "Current DATA". It provides information of SJB input/output conditions. |
4. |
To perform functional test on SJB outputs, select "Actuation Test" |
Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel") |
3. |
Disconnect the smart junction box (SJB) connectors and nuts. |
4. |
Disconnect the connector (A) in the back side of the smart junction box. |
Installation |
1. |
Connect the connectors and receiver antenna cable on the smart junction box. |
2. |
Install the smart junction box module. |
3. |
Install the crash pad lower panel. |
4. |
Connect the negative (-) battery terminal. |
Head Up Display Setting
On the LCD display, you can change the head up display settings as follows.
1. Display height
2. Illumination
3. Font color
4. Font size
5. Contents setting ...
Engine number
The engine number is stamped on the engine block as shown in the drawing. ...
Sunroof Glass Repair procedures
Replacement
•
Put on glove to protect your hands.
1.
Remove both sides of the decoration cover (A).
2.
Loosen the mounting screws, then remove the glass (A) by l ...