>

Hyundai Equus: Rear Wheel House Trim Repair procedures

Second generation VI (2009–2024) / Hyundai Equus VI 2009-2024 Service Manual / Body (Interior and Exterior) / Interior Trim / Rear Wheel House Trim Repair procedures

Replacement

•	Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.

•	Take care not to bend or scratch the trim and panels.

1.	Remove the rear seat cushion assembly. (Refer to Rear Seat - "Rear Seat Assembly")

2.	Remove the rear seat back assembly. (Refer to Rear Seat - "Rear Seat Assembly")

3.	Remove the rear door scuff trim. (Refer to Interior Trim - "Door Scuff Trim")

4.	Slighty remove the rear door body side weatherstrip.

5.	Using a screwdriver or remover, remove the rear wheel house trim (A).

6.

Install in the reverse order of removal.

•	Replace any damage clips.

Rear Wheel House Trim Components and Components Location

Component Location 1. Rear wheel house trim ...

Rear Package Tray Trim Components and Components Location

Component Location 1. Rear package tray trim ...

See also:

License plate lamp replacement
1.Open the trunk. 2.Disconnect the negative battery cable. 3.Using a screwdriver, remove the trunk lid latch cover(1). 4.Using a screwdriver, remove the trunk lid switch(2), and disconnect ...

Schematic Diagrams
Schematic Diagram Canister Canister is filled with charcoal and absorbs evaporated vapor in fuel tank. The gathered fuel vapor in canister is drawn into the intake manifold by the ECM/PCM when ...

Trunk Unlocking
To unlock: 1. Carry the Smart Key. 2. Either press the trunk handle button or press the Trunk Unlock button on the Smart Key for more than one second. 3. The hazard warning lights will blink two ...

Categories

Hyundai Equus Manuals

© 2011-2024 Copyright www.heqmanual.com