Hyundai Equus: Rear Variable Damper Schematic Diagrams

Rear Variable Damper Description and Operation

Description The rear variable damper consists of a damper and an upper mounting bracket. This damper determines vehicle behavior through the acceleration sensor in the ECS ECU, and it adjusts ...

Rear Variable Damper Repair procedures

Removal 1. Remove the rear wheel & tire. Tightening torque : 90.0 ~ 110.0 N.m(9.0 ~ 11.0 kgf.m, 65.0 ~ 80.0 lb-ft) 2. Disconnect the rear shock absorber (A) from the rear axle by loo ...

See also:

Unlocking
To unlock: 1. Carry the Smart Key. 2. Either put your hand in the driver’s outside door handle or press the Door Unlock button on the Smart Key. 3. The driver’s door will unlock. The hazard w ...

Muffler Repair procedures
Removal 1. Disconnect the rear oxygen sensor (HO2S) connector (A) on LH and RH side. 2. Remove the front muffler (A) on LH and RH side. Tightening torque : 39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m ...

Propeller Shaft Repair procedures
Inspection CV Joint and Boots 1. Shift the transaxle to Neutral. 2. Raise the vehicle off the ground, and support it with safety stands in the proper locations. 3. Check the center beari ...