>
Replacement |
[LH] |
|
|
1. |
Remove the rear seat cushion assembly [LH].
(Refer to Rear Seat - "Rear Seat Assembly") |
2. |
Remove the protector (A) located in the rear part of the rear seat cushion. |
3. |
After removing the hog-ring clips on the rear of seat cushion cover and remove the rear seat cushion cover (A). |
4. |
Install in the reverse order of removal. |
Warning lights
✽ NOTICE - Warning lights
Make sure that all warning lights are OFF after starting the engine. If any
light is still ON, this indicates a situation that needs attention.
Supplemental Restra ...
Relay Box (Passenger Compartment) Components and Components Location
Component Location
...
Heated Steering wheel Description and Operation
Descrption and Operation
The steering wheel heating system will not be active with an
ambient temperature above the system set point temperature. The steering
wheel heater element is connected ...