>
Replacement |
1. |
Remove the rear seat cushion assembly.
(Refer to Rear Seat - "Rear Seat Assembly") |
2. |
Loosen the mounting bolt, and then remove the rear seat belt buckle (A).
[LH]
[RH]
|
3. |
Install in the reverse order of removal. |
1. |
Remove the rear seat cushion assembly.
(Refer to Rear Seat - "Rear Seat Assembly") |
2. |
Loosen the mounting bolt, and then remove the rear seat belt buckle (A).
[LH]
[RH]
|
3. |
Install in the reverse order of removal. |
In-car Sensor Description and Operation
Description
An in-car air temperature sensor is located in the heater control.
The sensor contains a thermistor which measures the
temperature of the cabin. The signal determined by the resistan ...
Closing the Fuel Filler Lid
1. To install the fuel tank cap, turn it clockwise until it clicks one time.
2. Close the Fuel Filler Lid until it is latched securely.
If the Malfunction Indicator Light (
) comes ON, turn the eng ...
Description and Operation
Description
System Overview
The System offers the following features:
-
Human machine interface through a 1-stage button, for terminal switching and engine start.
-
Control of external re ...